As the owner of a bicycle should be paid depending on his bike using too much care accordingly. The appropriate level of care can do much to extend life of wear parts. The largest part of any bike is to wear the chain. Especially for bikes with derailleur is worn down by the mechanical forces acting on the chain are particularly high.
How to clean and maintain it for now actually his bike chain right?
There are some observed which may affect the life time of a strong chain. You should definitely avoid water. Water in any form is poison for a bike. Especially high-pressure cleaners are taboo. You can specify a chain or a whole bike in seconds the rest. The high pressure forces the water into the finest spaces, and thus washes out the internal lubrication.
To replace these, a total decomposition of lubrication is needed, which in most parts of today is no longer possible. Therefore, these lubricants are also designed for a lifetime of a component.
Furthermore, one should pay attention to the quality of the oil. Rather buy a higher quality oil, and better protect its chain against the mechanical stresses. There are many myths surrounding the correct oil, is best served to consult the dealer to leave.
Things we are needed: A lint-free cloth old (preferably cotton), an old toothbrush / package line for the spaces alcohol or special cleaning chain, and of course, chain lubrication oil for later.
Step-by-step instructions:
Coarse cleaning - Take an old rag and moisten it slightly with alcohol (or chain cleaner). Now you embrace with a damp cloth and let the chain, the chain slip several times backward through the tabs (pedals rotate backwards). The dirt can be removed easily and quickly.
Cleaning of the spaces and pinion - Here is an old toothbrush proved best. Alternatively, also line package as "dental floss" misuse. With a toothbrush (or the package line) every interval, one after the other, carefully cleaned.
Forget the sprockets and other moving parts of the derailleur is not. While this is quite a Sisyphean task, but provides considerably less wear. Grade the spaces to sit down very quickly with dirt.
Oil chain - the chain is clean again, it goes completely fast and easy. Simply turn the chain backwards and the oil onto the moving chain. The oil spreads itself from its own. Waste oil then wipe off easily.
Now your chain for the next ride is ready again.
How to clean and maintain it for now actually his bike chain right?
There are some observed which may affect the life time of a strong chain. You should definitely avoid water. Water in any form is poison for a bike. Especially high-pressure cleaners are taboo. You can specify a chain or a whole bike in seconds the rest. The high pressure forces the water into the finest spaces, and thus washes out the internal lubrication.
To replace these, a total decomposition of lubrication is needed, which in most parts of today is no longer possible. Therefore, these lubricants are also designed for a lifetime of a component.
Furthermore, one should pay attention to the quality of the oil. Rather buy a higher quality oil, and better protect its chain against the mechanical stresses. There are many myths surrounding the correct oil, is best served to consult the dealer to leave.
Things we are needed: A lint-free cloth old (preferably cotton), an old toothbrush / package line for the spaces alcohol or special cleaning chain, and of course, chain lubrication oil for later.
Step-by-step instructions:
Coarse cleaning - Take an old rag and moisten it slightly with alcohol (or chain cleaner). Now you embrace with a damp cloth and let the chain, the chain slip several times backward through the tabs (pedals rotate backwards). The dirt can be removed easily and quickly.
Cleaning of the spaces and pinion - Here is an old toothbrush proved best. Alternatively, also line package as "dental floss" misuse. With a toothbrush (or the package line) every interval, one after the other, carefully cleaned.
Forget the sprockets and other moving parts of the derailleur is not. While this is quite a Sisyphean task, but provides considerably less wear. Grade the spaces to sit down very quickly with dirt.
Oil chain - the chain is clean again, it goes completely fast and easy. Simply turn the chain backwards and the oil onto the moving chain. The oil spreads itself from its own. Waste oil then wipe off easily.
Now your chain for the next ride is ready again.
No comments:
Post a Comment