Before replacing the lining, where they will check carefully the points of light and water in the kitchen.
Before replacing the lining, where they will check carefully the points of light and water in the kitchen.
Kitchen design, often developed by a specialized company, requires special attention to the points of electrical and plumbing. They should be planned and scheduled prior to placement of any coating.
The definition of equipment to be used is of paramount importance. The stove has many mouths? It is built or floor? Is there a dishwasher? Which model: large or small? The tub will be double or single?
The points of electrical and plumbing should be planned and scheduled prior to placing any kitchen flooring
Once selected the equipment, review the manufacturer’s manual. Do this before you buy. First, check the volumetric information, such as part dimensions and spacing required free around him. So you can evaluate whether this equipment will be compatible with the space in which you want to put it. Buy the equipment of dreams can be a nuisance if it is too large as to hinder the opening of a door or require a ladder to each use.
Past this stage, seek the recommendations in the manual installation of each item. As should be from the spinning frame light? There is a relationship between the wire gauge in accordance with the voltage and away from the equipment frame. What is the correct location for the taking? Do not forget the independent circuit breaker and use the DR – residual current device – for security, and DPS-device surge protection.
Taken to locate a microwave, electric oven and other equipment that are fixed on the bench and some extra points for use of floating, as blenders, faucets, etc.. Predict whether to buy a coffee machine and remember that cold water filter needs to take.
In the case of hydraulic systems, check the height of the water inlet and outlet of the sewer. When there is gas installation, it must be in accordance with NBR 13932 and 13933.
The points should not coincide with the height of the bench and the pediment above it. If any point lies in the division of cabinet, you can get around with a hole in the wood.
Be aware of new plugs and sockets.
No comments:
Post a Comment